Telum 624/628-TEJ

The Telum 624/628-TEJ is a high performance, cost effective, 4 port (Telum 624-TEJ) or 8 port (Telum 628-TEJ) T1/E1/J1 AdvancedMC module designed for high availability Telecom edge access applications. This full-size module (628-TEJ)/ full-size or mid-size module (624-TEJ) features 4 or 8 independent, fully protected, full duplex ports. The x4 PCI Express (PCIe) serial fabric interface is used as the central data/control transport medium. The HDLC communication controller supports up to 128/256 channels with an integrated 32-bit/66 MHz PCI Bus interface. The HDLC controller supports the 4 or 8 full duplex T1/E1/J1 lines. This controller supports extracting HDLC frames, buffering these frames in local FIFOs, and transferring them to host memory through a PCI-to- PCIe Bridge. It will also support transparent mode. There is a microprocessor based CSU/DSU subsystem for network line management. There are multiple data loopback and diagnostics modes supported. There are two GbE GMII serial fabric interfaces to the AdvancedMC backplane connected to lanes 0 and 1. The second GbE port can be used in redundancy schemes. The Telum 624/628-TEJ gives customers a unique, high performance T1/E1/J1 WAN I/O solution for ATCA and MicroTCA systems.

Carrier Grade Linux software support available
AMC.0 R2.0 compliant
AdvancedMC Hot Swap compliant
Onboard CSU/DSU
128/256 DSO channels
4/8 ports T1/E1/J1, AMC.0 R2.0 compliant

	Type	Title
	Data Sheet	Telum 624/628-TEJ
	User Manual	IPMI Upgrade Procedure
	User Manual	Telum 624/628
	White Papers	Ethernet Interoperability in AdvancedTCA, AdvancedMC and MicroTCA (GFT-616A) Even though Ethernet is ubiquitous and well known, there are a number of design parameters that affect device interoperability in the ecosystem.
	White Papers	Using Modular Building Blocks in Wireless Networks Published here with permission from Intel®, this paper describes how telecommunications companies can accelerate the rollout of new wireless technologies and services using Intel® building blocks.
	White Papers	WAN Monitoring
	Software	IPMI Upgrade Utility 1.0

Customer support contact info for this product is listed below by global region. All related documentation and software for this product are listed under the "Downloads" tab of this product page.

Primary Support

Foxboro, MA
325 Foxborough Blvd
Foxboro, MA 02035

Support Phone: 1-888-727-2666
Hour: Monday - Friday, excluding holidays from 8:00 AM - 5:00 PM ET
Support E-mail: support.huntsville.ip@ge.com
RMA E-mail: repairs.huntsville.ip@ge.com

Europe, Middle East, Africa Support

Augsburg, Germany
Memminger Str. 14 D-86159
Augsburg,

Support Phone: +49 821 5034-170
Hour: Monday - Thrusday, excluding holidays from 8:00 AM - 5:00 PM ET; Friday 8:00 AM - 4:00 PM
Support E-mail: support.augsburg.ip@ge.com

Asia Pacific, Oceana Support

Beijing, China
Tower A, Longsheng Building
#A5 Rongchang East Road, BDA
Beijing, 100176

Support Phone: (8610) 8722-6352
Support E-mail: support-apo.gefes@ge.com

Telum 1004-O3S - The Telum 1004-O3S AdvancedMC is a high performance, single wide, full height, AMC.1 compliant 4 port ATM adapter featuring a front I/O full duplex OC-3 interface and SFP single mode fibre connectors.
Telum 1004-O3M - The Telum 1004-O3M AdvancedMC is a high performance, single wide, full height, AMC.1 compliant 4 port ATM adapter featuring a front I/O full duplex OC-3 interface. The Telum 1004-O3M has Automatic Protection Switching (APS)and supports multimode optics.
AMC-7S-CHASSIS - AMC-7S-CHASSIS is a standalone chassis that is ideal for building computer systems based on AdvancedMC form factor boards. A system controller slot with an x8 PCI Express interface is provided for an AdvancedMC single board computer. Seven additional Adva
Telum ASLP10 - Single-width full-height processor AMC based on Intel® Pentium®M Processor with up to 2GB DDR2 SDRAM
AT4x-AMC1 - AT4x-AMC1 is an AMC.1 compliant AdvancedTCA (ATCA) carrier blade that is available with 4 mid-size, or 2 mid-size & 2 full-size bays.
BCT4-AMC1 - BCT4-AMC1, an AdvancedMC carrier blade designed specifically for IBM BladeCenter and BladeCenterT chassis, enables high-performance solution-specific blades to be built using a wide variety of AdvancedMC modules.
Telum FC2312-CC - Telum FC2312-CC is a 2 Gb/s Fibre Channel HBA with AdvancedMC form factor that provides connectivity to a x4 PCI Express baseboard. This HBA has dual copper interfaces.
Telum 1001-O3M2 - The Telum 1001-O3M2 is a high performance, single wide, full height, AdvancedMC (AMC.1 compliant) ATM adapter featuring a front I/O full duplex OC-3 interface. The Telum 1001-O3M/2 Line uses the PCIe to communicate with the ATCA system host processor.
Telum 1001-O3M1 - The Telum 1001-O3M1 is a high performance, single wide, full height, AdvancedMC (AMC.1 compliant) ATM adapter featuring a front I/O full duplex OC-3 interface. The Telum 1001-O3M1 Line uses the PCI Express Bus to communicate with the host processor on an
Telum 1001-O3S2 - The Telum 1001-O3S2 AdvancedMC is a single wide, full height, AMC.1 compliant ATM adapter with a front I/O full duplex OC-3 interface. This module features 1 full duplex OC-3 port, 1 APS port and SFP single mode fiber optic connectors
Telum 1001-O3S1 - The Telum 1001-O3S1 AdvancedMC is a high performance, single wide, full height, AMC.1 compliant ATM adapter featuring a front I/O full duplex OC-3 interface. This AdvancedMC features: a single OC-3 interface and an SFP single mode fiber optic connector.
MAXIM 624-TEJ - MAXIM 624-TEJ is a high performance, cost-effective 4-port T1/E1/J1 PCI Telecom Mezzanine Card (PTMC) adapter designed for high availability Telecom edge access applications.
Telum 1204-O3 - Telum 1204-O3 is the industry's first intelligent high performance, cost effective multi-service OC-3 interface module in AdvancedMC (AMC) format. This AMC.0 R.20 compliant module supports four ports of ATM OC-3/STM1.
MP-3000 - Pre-validated, application-ready platform featuring an 8U 15-slot MicroTCA chassis with 355W power module, a cooling unit, MicroTCA Carrier Hub and complement of 5 AdvancedMCs including a Processor AMC.
Telum FC2312-FF - Telum FC2312-FF is a 2 Gb/s Fibre Channel HBA with AdvancedMC form factor that provides connectivity to a 4x PCI Express baseboard. This HBA has dual fiber interfaces.
Telum 1001-DE - The Telum 1001-DE AdvancedMC is a high performance, single wide, full height, AMC.1 compliant ATM adapter featuring a front I/O full duplex DS3/E3 interface. The Telum 1001-DE line uses the PCI Express (PCIe) bus to communicate with the host processor on
Telum 1001-O12S2 - The Telum 1001-O12S2 is a high performance, single wide, full height, AMC.1 compliant 1 port ATM adapter featuring a front I/O full duplex OC-12 interface. The Telum 1001-O12S2 uses the PCIe to communicate with the ATCA system host processor.
Telum 1001-O12S1 - The Telum 1001-O12S1 is a high performance, single wide, full height, AdvancedMC (AMC.1 compliant) 1 port ATM adapter featuring a front I/O full duplex OC-12 interface. The Telum 1001-O12S1 uses the PCI Express Bus to communicate with the host processor o
Telum 1001-O12M2 - The Telum 1001-O12M2 is a high performance, single wide, full height, AMC.1 compliant 1 port ATM adapter featuring a front I/O full duplex OC-12 interface. The Telum 1001-O12M2 uses the PCI Express Bus to communicate with the host processor on an ATCA.
Telum 1001-O12M1 - The Telum 1001-O12M1 is a high performance, single wide, full height, AdvancedMC (AMC.1 compliant) 1 port ATM adapter featuring a front I/O full duplex OC-12 interface. The Telum 1001-012M1 uses the PCI Express Bus to communicate with the host processor.
Telum GE-QT - Telum GE-QT is a 4-port Gigabit Ethernet AdvancedMC NIC providing high bandwidth and high port density. It is ideal for telecommunication platforms requiring additional Ethernet links and AdvancedMC form factor.
Telum 2001-VGA - Telum 2001-VGA provides a high-quality, high-performance graphics adapter for an AdvancedMC carrier board. It supports a variety of SVGA/CRT monitors in a single display configurations. This AdvancedMC is ideal for board development applications.
MP-2000 - Pre-validated, application-ready platform featuring a 2U 13-slot MicroTCA chassis with 450W power subsystem with AC input, dual cooling units, MicroTCA Carrier Hub and complement of 5 AdvancedMCs including a Processor AMC.

400030 RJ48-to-RJ48 Crossover Cable; 400034 RJ48-to-RJ48 Straight Cable; 800098 RJ48 Loopback Plug