VME-2536

No Image Available

32-Channel Optically Coupled Digital I/O Board with Built-in-Test. This board has 32 optically coupled inputs and 32 optically coupled outputs. Both the outputs and inputs have Built-in-Test capability and provide a sustained 1 kV of system isolation to the VMEbus backplane.

  • 300 mA current sinking outputs
  • Input ranges of 5 to 125 VDC
  • Voltage sensing or contact sensing inputs
  • Standard data or short I/O addressing A16 or A24
  • 8-, 16-, 32-bit data transfers
  • High isolation potential
  • 32 optically coupled inputs
  • 32 optically coupled outputs
  • 50 V maximum output voltage
  • Supports Built-in-Test for both inputs and outputs
  Type Title
Data Sheet ACC-BT10
Data Sheet VME-2536
Hardware Manual VME-2536 Hardware Reference Manual
Customer support contact info for this product is listed below by global region. All related documentation and software for this product are listed under the "Downloads" tab of this product page.

Primary Support

Huntsville, AL
12090 South Memorial Parkway
Huntsville, AL 35803-3308

Support Phone: 1-800-433-2682
Support E-mail: support.huntsville.ip@ge.com
RMA E-mail: repairs.huntsville.ip@ge.com


Europe, Middle East, Africa Support

Augsburg, Germany
Memminger Str. 14 D-86159
Augsburg,

Support Phone: +49 821 5034-170
Hour: Monday - Thrusday, excluding holidays from 8:00 AM - 5:00 PM ET; Friday 8:00 AM - 4:00 PM
Support E-mail: support.augsburg.ip@ge.com


Asia Pacific, Oceana Support

Beijing, China
Tower A, Longsheng Building
#A5 Rongchang East Road, BDA
Beijing, 100176

Support Phone: (8610) 8722-6352
Support E-mail: support-apo.embeddedsystems.ip@ge.com


VME-000-64-xxx IDC 64pin ITW Pancon 120-964-435 Cable
  • SFT-9450 - IOWorks board drivers are GE Intelligent Platforms’s IOWorks data acquisition and control (DAQC) software driver.
  • ACC-BT02 - Dual 64-pin Transition Panel with Bussed Ground
  • ACC-BT01 - Dual 64-pin Transition Panel Converts two 64-pin DIN connectors to lift clamp terminal blocks