VME-2510B
|
The VME-2510B is a VMEbus compatible 64-Bit TTL Input/Output Board. The VME-2510B is designed with common programming features and Subsystems configured with contiguous I/O addresses to conserve memory as the VME-2120. These products are designed with two sets of board address switches to provide an efficient memory address map for CSR and I/O addresses. CSR address switches may be set such that all CSR's among a variety of boards in a system may be mapped into contiguous memory locations.
The VME-2510B product is also designed to support 8-, 16-, and 32-bit data transfers. Specific hardware has been designed into the VME-2510B to support built-in-test functions. The VME-2510B supports both off-line and on-line fault detection and isolation.
|
- 8-, 16-, 32-bit transfers
- Optional open-collector outputs
- High reliability DIN-type I/O connections
- Built-in-Test logic for fault detection and isolation
- Fail LED
- Compatible with VMIC's Intelligent I/O Controller product line
- Separate board address decoding for control and data registers
- The direction of each 8-bit port is individually programmable
- 64 mA sink capability
For Technical Support please visit : support.ge-ip.com.
Or you can also contact GE Intelligent Platforms directly by using one of the following options:
Submit a support case online at: eservice.ge-ip.com
Note: GlobalCare Contract required to submit a support case online for GE Intelligent Platforms Software Products.
Americas
Online: eservice.ge-ip.com
Phone: 1-800-433-2682
Email: support.ip@ge.com
Primary language of support: English
Europe, Middle-East, & Africa
Online: eservice.ge-ip.com
Phone: +800-1-433-2682
+1 780 401 7717 (if the toll free 800 option is unavailable in your country or dialing from a mobile telephone)
Email: support.emea.ip@ge.com
Primary languages of support: English, French, German, Italian, Czech
Asia Pacific
Online: eservice.ge-ip.com
Phone: +86-400-820-8208
+86-21-3217-4826 (India, Indonesia & Pakistan)
Email: support.cn.ip@ge.com (China)
support.jp.ip@ge.com (Japan)
support.in.ip@ge.com (Rest of Asia)
VME-000-64-xxx IDC 64pin ITW Pancon 120-964-435 Cable
|