VME-2210

No Image Available

The VME-2210 provides 64 One Form C (SPDT) contacts to the user via two 96-pin DIN connectors. These relays are the magnetic latching type which means that, once a contact is set it will remain set (even if power is removed from the relay) until it is reset.
  • when used with companion surge suppression panel
  • Compatible with ANSI/IEEE C37.90.1-1982 surge protection
  • Protection from relays changing during power up/down
  • 2.0 A current rating
  • 8-, 16-, or 32-bit data transfers
  • Supports real time and offline fault detection and isolation
  • 1 Form C contacts (SPDT) with 96-conductor cable
  • Available in latching and nonlatching versions
  • Latching contacts will hold their state with power off
  • 1 Form A contacts (SPST) with 64-conductor cable
  Type Title
Data Sheet ACC-BT10
User Manual Vme2210 Manual
Datasheet - Technical VME-2210
Customer support contact info for this product is listed below by global region. All related documentation and software for this product are listed under the "Downloads" tab of this product page.

Primary Support

Huntsville, AL
12090 South Memorial Parkway
Huntsville, AL 35803-3308

Support Phone: 1-800-433-2682
Support E-mail: support.huntsville.ip@ge.com
RMA E-mail: repairs.huntsville.ip@ge.com


Europe, Middle East, Africa Support

Augsburg, Germany
Memminger Str. 14 D-86159
Augsburg,

Support Phone: +49 821 5034-170
Hour: Monday - Thrusday, excluding holidays from 8:00 AM - 5:00 PM ET; Friday 8:00 AM - 4:00 PM
Support E-mail: support.augsburg.ip@ge.com


Asia Pacific, Oceana Support

Beijing, China
Tower A, Longsheng Building
#A5 Rongchang East Road, BDA
Beijing, 100176

Support Phone: (8610) 8722-6352
Support E-mail: support-apo.embeddedsystems.ip@ge.com


VME-000-96-xxx IDC 96pin Erni 913-031 Cable
  • SFT-9450 - IOWorks board drivers are GE Intelligent Platforms’s IOWorks data acquisition and control (DAQC) software driver.
  • ACC-BT03 - ACC-BT03 Dual 96-pin Transition Panel with Bussed Ground
  • ACC-BT10 - ACC-BT10 DIN Rail Transition Module for Euro-Din C 64-pin, C 96-pin, and C/2 32-pin Connectors