VME-1160A

No Image Available

This product is designed with standard COS control and interrupt logic that detects any COS and provides an interrupt vector to the byte level. Each byte (8 bits) of input may have a unique interrupt vector that is generated upon a COS in any bit of that byte. Interrupts are generated on any COS (positive or negative transition). Polarity is determined by reading the input port after the COS interrupt. This board may be ordered with positive or negative true data.

  • Supports 8- or 16-bit transfers
  • High isolation, 1,000 V sustained, 7,500 V pulsed
  • Jumper-selectable nonprivileged or supervisory short I/O transfers
  • Filtered input debouncing option
  • High reliability DIN-type input connector
  • 5, 12, 24, and 48 V input option
  • Wide variety of input signal conditioning
  • Contact sense or voltage source options
  • COS interrupts
  Type Title
Data Sheet ACC-BT10
User Manual Vme1160a Manual
User Manual VMIACC-BT01
Datasheet - Technical VME-1160A
Customer support contact info for this product is listed below by global region. All related documentation and software for this product are listed under the "Downloads" tab of this product page.

Primary Support

Huntsville, AL
12090 South Memorial Parkway
Huntsville, AL 35803-3308

Support Phone: 1-800-433-2682
Support E-mail: support.huntsville.ip@ge.com
RMA E-mail: repairs.huntsville.ip@ge.com


Europe, Middle East, Africa Support

Augsburg, Germany
Memminger Str. 14 D-86159
Augsburg,

Support Phone: +49 821 5034-170
Hour: Monday - Thrusday, excluding holidays from 8:00 AM - 5:00 PM ET; Friday 8:00 AM - 4:00 PM
Support E-mail: support.augsburg.ip@ge.com


Asia Pacific, Oceana Support

Beijing, China
Tower A, Longsheng Building
#A5 Rongchang East Road, BDA
Beijing, 100176

Support Phone: (8610) 8722-6352
Support E-mail: support-apo.embeddedsystems.ip@ge.com


VME-000-94-xxx IDC 64pin ITW Pancon 120-964-435 Cable
  • SFT-9450 - IOWorks board drivers are GE Intelligent Platforms’s IOWorks data acquisition and control (DAQC) software driver.
  • ACC-BT02 - Dual 64-pin Transition Panel with Bussed Ground
  • ACC-BT01 - Dual 64-pin Transition Panel Converts two 64-pin DIN connectors to lift clamp terminal blocks