VME-1128

No Image Available

VME-1128 is a 128-bit High-Voltage Digital Input Board with Built-in-Test. This product complies with the VMEbus specification (ANSI/IEEE STD 1014-1987, IEC 821 and 297) with the following mnemonics: A24:A16:D32/D16/D08 (EO): Slave: 39/3D:29/2D Form factor: 6U

  • • Complies with the VMEbus Specification Rev. C.1
  • • High reliability DIN-type I/O connectors
  • • Double Eurocard form factor (6U)
  • Open circuit provides logic zero or (jumper-selectable) logic one
  • • A24:A16:D32/D16/D08 (EO): slave: 39/3D:29/2D
  • • Front panel with fail LED
  • • On-board Built-in-Test logic for fault detection and isolation
  • Each group of eight inputs is jumper selectable to monitor voltage source or current sinking signals
  • 128 bits of high-voltage digital inputs
  Type Title
Data Sheet ACC-BT10
User Manual VMIACC-BT03
Datasheet - Technical SFT-9450 IO Board Driver
Datasheet - Technical VME-1128
Hardware Manual VME-1128 Hardware Reference Manual
Customer support contact info for this product is listed below by global region. All related documentation and software for this product are listed under the "Downloads" tab of this product page.

Primary Support

Huntsville, AL
12090 South Memorial Parkway
Huntsville, AL 35803-3308

Support Phone: 1-800-433-2682
Support E-mail: support.huntsville.ip@ge.com
RMA E-mail: repairs.huntsville.ip@ge.com


Europe, Middle East, Africa Support

Augsburg, Germany
Memminger Str. 14 D-86159
Augsburg,

Support Phone: +49 821 5034-170
Hour: Monday - Thrusday, excluding holidays from 8:00 AM - 5:00 PM ET; Friday 8:00 AM - 4:00 PM
Support E-mail: support.augsburg.ip@ge.com


Asia Pacific, Oceana Support

Beijing, China
Tower A, Longsheng Building
#A5 Rongchang East Road, BDA
Beijing, 100176

Support Phone: (8610) 8722-6352
Support E-mail: support-apo.embeddedsystems.ip@ge.com


VME-000-96-xxx IDC 96pin Erini 913-031 Cable ACC-BT11 DIN Mounting Rails for Transition Modules (two-meter strip) P2 Power Adapter Accessaory for the VME-1128 Ordering option: ACC-0129
  • SFT-9450 - IOWorks board drivers are GE Intelligent Platforms’s IOWorks data acquisition and control (DAQC) software driver.
  • ACC-BT10 - ACC-BT10 DIN Rail Transition Module for Euro-Din C 64-pin, C 96-pin, and C/2 32-pin Connectors
  • ACC-BT03 - ACC-BT03 Dual 96-pin Transition Panel with Bussed Ground