VME-4140

No Image Available

VME-4132 32-Channel 12-bit Analog Output Board
  • Self-test
  • Unipolar (0 to +10 V, 0 to +5 V, 0 to +2.5V) or bipolar (±2.5, ±5, ±10 V) software selectable
  • Single reference potentiometer - no other manual calibration required
  • Software or external synchronous update of double-buffered outputs
  • Random update (nonscanning)
  • 0.8 ? output impedance
  • One 12-bit DAC per output channel
  • Discrete wire or mass-terminated cables
  • 32 analog output channels
  Type Title
Data Sheet ACC-BT10
Data Sheet VME-4140
Hardware Manual VME-4140 Hardware Reference Manual
Customer support contact info for this product is listed below by global region. All related documentation and software for this product are listed under the "Downloads" tab of this product page.

Primary Support

Huntsville, AL
12090 South Memorial Parkway
Huntsville, AL 35803-3308

Support Phone: 1-800-433-2682
Support E-mail: support.huntsville.ip@ge.com
RMA E-mail: repairs.huntsville.ip@ge.com


Europe, Middle East, Africa Support

Augsburg, Germany
Memminger Str. 14 D-86159
Augsburg,

Support Phone: +49 821 5034-170
Hour: Monday - Thrusday, excluding holidays from 8:00 AM - 5:00 PM ET; Friday 8:00 AM - 4:00 PM
Support E-mail: support.augsburg.ip@ge.com


Asia Pacific, Oceana Support

Beijing, China
Tower A, Longsheng Building
#A5 Rongchang East Road, BDA
Beijing, 100176

Support Phone: (8610) 8722-6352
Support E-mail: support-apo.embeddedsystems.ip@ge.com


VME-000-64-xxx IDC 64pin AMP 925486-1 Cable
  • SFT-9450 - IOWorks board drivers are GE Intelligent Platforms’s IOWorks data acquisition and control (DAQC) software driver.
  • ACC-BT01 - Dual 64-pin Transition Panel Converts two 64-pin DIN connectors to lift clamp terminal blocks
  • ACC-BT02 - Dual 64-pin Transition Panel with Bussed Ground
  • ACC-BT10 - ACC-BT10 DIN Rail Transition Module for Euro-Din C 64-pin, C 96-pin, and C/2 32-pin Connectors